▸ Inner Tube

Constructed from premium SBR/NR synthetic rubber compounds specifically formulated for abrasion resistance. The smooth bore minimizes friction and prevents aggregate buildup during pumping operations.

▸ Reinforcement Layer

High-tensile steel wire or textile cord spiral provides structural integrity to withstand working pressures. Steel wire reinforced hose handles pressures up to 85 bar (1230 PSI), while textile reinforced hose serves lighter-duty applications up to 55 bar.

▸ Outer Cover

Weather-resistant rubber sheath protects against UV radiation, ozone exposure, and mechanical damage. The cover maintains flexibility across temperature ranges from -35°C to 80°C without cracking or degradation.

▸ High-Rise Buildings

Long-distance vertical pumping requires high pressure concrete hose with superior burst resistance. Steel wire reinforced construction handles pressures up to 85 bar while maintaining flexibility for routing through tight building cores. Typical applications include residential towers, office complexes, and mixed-use developments where concrete must be delivered 50+ meters vertically.

▸ Bridge & Tunnel Construction

Confined space delivery demands wear resistant concrete hose that can navigate complex pathways while withstanding abrasion from aggregate movement. These projects often involve continuous pumping over extended periods, making durability and reliability paramount. Applications include bridge decks, pier foundations, tunnel linings, and underground transportation infrastructure.

▸ Foundation & Civil Works

Flexible operation capabilities allow concrete rubber hose to adapt to changing placement points throughout excavation and foundation pour sequences. The hose must handle variable flow rates and maintain performance across different concrete mix designs. Common uses include pile caps, grade beams, retaining walls, and mass concrete pours for dams and industrial facilities.

▸ Ready-Mix Concrete Plants

Reliable daily operation in batching plants and pre-cast facilities requires concrete hose construction that withstands repetitive use cycles. These installations benefit from easily replaceable hose sections and standardized coupling systems. Plant operators prioritize hoses that deliver consistent performance across thousands of batches while minimizing maintenance downtime.

Premium Raw Materials: High-strength SBR/NR synthetic rubber compounds deliver superior abrasion resistance and extended service life compared to standard formulations.

Rigorous Testing Protocols: Every concrete pump hose undergoes AKRON abrasion testing for 10,000+ cycles, pressure burst testing, and dimensional verification before leaving our facility.

Custom Solutions Available: Flexible manufacturing capabilities accommodate custom lengths, specialized fittings (flange, clamp, quick-connect), and unique project requirements.

OEM & Private Label Support: Complete branding services for distributors and equipment manufacturers seeking reliable concrete hose supplier partnerships.

International Certifications: SGS, ISO, MSHA, and CE certified manufacturing processes guarantee compliance with global safety and performance standards.

Clean After Each Use: Flush concrete pumping hose immediately after pumping to prevent residual concrete from hardening inside. Use sponge balls or water pressure to remove all material, paying special attention to bends and connections.

Regular Inspection Schedule: Check couplings, clamps, and gaskets before each use for wear or damage. Examine the outer cover for cuts, abrasion, or bulging that might indicate internal reinforcement failure.

Proper Storage Conditions: Store hoses in dry, covered areas away from direct sunlight and ozone sources. Lay flat or coil loosely to prevent kinking. Avoid storage near solvents or petroleum products that degrade rubber.

Handle With Care: Avoid dragging concrete hose across rough surfaces or sharp edges. Use protective sleeves in high-abrasion areas. Never exceed the specified minimum bend radius during operation.

Replace Worn Components: Retire hoses showing significant wear, bulging, or coupling looseness. Continuing to use compromised equipment risks burst failures and worker injury.

Q: How long does a concrete hose last?

Service life varies based on usage intensity, concrete mix characteristics, and maintenance practices. Under typical conditions with proper care, a quality concrete placement hose delivers 2,000 to 5,000 cubic meters of concrete. High-volume commercial operations may require replacement after 6-18 months, while occasional users can expect several years of service.

Q: Which pumps are compatible with EVERGOOD hoses?

EVERGOOD concrete pump hose works with all major brands including Putzmeister, Schwing, CIFA, Zoomlion, Sany, and others. We offer multiple coupling configurations (flange, clamp, quick-connect) to match your specific pump connections. Contact our technical team with your pump model for exact fitting recommendations.

Q: Can you customize hose length and fittings?

Yes, EVERGOOD provides full customization for concrete delivery hose specifications. We manufacture custom lengths from 1 to 40+ meters and can install various end fittings including flanges, clamps, and quick-coupling systems. Minimum order quantities apply for specialized configurations. Our engineering team assists with technical specifications to ensure optimal performance.

Q: What's the difference between concrete hose and slurry hose?

While both handle abrasive materials, concrete hose features reinforcement designed for intermittent high-pressure pumping with aggregates up to 40mm. Slurry hose typically serves continuous-flow applications with finer particles at lower pressures. The tube compounds and reinforcement structures differ significantly. Always specify concrete-rated hose for concrete pumping applications.

Q: How should I store hoses for long-term use?

Store concrete rubber hose in a cool, dry location away from direct sunlight, ozone sources, and petroleum products. Lay flat or coil loosely with a diameter at least 10 times the hose diameter. Clean and dry thoroughly before storage. Inspect couplings and apply light oil to metal components. Avoid storage in areas subject to extreme temperature fluctuations.